|
UPGRADING
XBOX HDD
FOR
EVOLUTIONX v1.8.2594 or higher
1. What you need :
*
EvolutionX 1.8.2594 or v1.8.2812 dashboard or higher.
* A modchip/bios with the HDD-swap hack. (All recent
EvoX and X-ecuter BIOS's support this feature, but if
you have an old mod chip (Xtender, Enigmah-X you won't
be able to upgrade your HDD)
* A new HDD (normal PC IDE drive upto 120gb). NO need
to zero(hdprepare) the drive anymore. Just use a new
blank drive.
* A CD-RW/DVD-RW (or anything that reads fine in your
xbox).
* EvoX dashboard installed on your current HD. (see
tutorial)
* Know how EvoX Dashboard works (ftp , transfering files
, configuring ini file , ...).
2. Backup your settings
Boot your Xbox.
Under "Systems Utils" , select "Backup".
(this is the location of the backup utility if u didn't
change the menu structure in the original evox.ini file).
This should have made a backup of some important settings
of your xbox.
If everything worked fine it made a directory /backup
in the C drive of your Xbox HD.
3. Backup your drives
Connect with FTP to your Xbox and copy
the whole "C" and "E" drive to your
PC HD. ("C" is pretty small , the size of
"E" depends on what u uploaded there already).
Make 100% sure you have a FULL backup of the Xbox C
& E drive on your PC.
Also check that in C you have a directory /backup with
5 files in it. If you don't have this it means something
went wrong in step 2.
4. Make a EvoX Install HD disk
These are the files you need on your
Evox Install HD CD :
* The EvoX XBE file , should in the
disk root and called "default.xbe"
* The "evox.ini" should be changed , open
it in notepad.
Make sure the network settings are set correctly for
your home network.
Under "[Misc]"
put "UseFDrive" to "Yes"
Delete everything what's under "[Menu]" it
and replace by this :
Section "Install Menu"
{
Item "Install New drive",@210
Item "Settings",@9
Item "Reboot",@5
}
[Action_10]
Info "Install HDD - Xbox-Scene"
Warning "This will format all drives"
Warning "Make sure you have a backup of C &
E"
Progress "Formatting drives"
ConfigSector "\backup\disk.bin"
Format c:
Format e:
Format f:
Format x:
Format y:
Format z:
[Action_11]
[Action_12]
Here is an example of an evox.ini file.
You might need to change the network settings for your
configuration. (use the same network settings as on
your EvoX dashboard installed on your original Xbox
HD).
Note : some people might wonder why
I don't use the copy feature of evox to restore the
C & E drive automaticly. It will work , but there's
a small bug in this version of evox 'cause all files
copied with the copy function will be 'read only' ...
that means you can't delete/rename/overwirte the files.
So atm , we can't use this method.
* You should also add the complete /backup
directory from the C drive on your Xbox.
* So , the complete CD should contain
:
default.xbe (the evox dash)
evox.ini (the evox ini file)
/backup/bios.bin (from /c/backup on Xbox HD)
/backup/disk.bin (from /c/backup on Xbox HD)
/backup/eeprom.bin (from /c/backup on Xbox HD)
/backup/hddinfo.txt (from /c/backup on Xbox HD)
/backup/hddkey.bin (from /c/backup on Xbox HD)
First make a xiso of the disk content
(tutorial) , then burn it with PrimoDVD (tutorial) or
Nero on media compatible with your xbox (cd-rw/dvd-rw/dvd-r).
5. Replace HD
Open your xbox (tutorial) and replace
the HD. Make sure your new HD is set to "master"
and don't forget to plug-in both the electricity-cable
& IDE-cable.
I strongly suggest to keep your old
harddrive untouched... you might need it later if something
goes wrong.
6. Try booting the CD & FTP
Boot your Xbox (it will give a red light
after some secs) and put the Evox Install HD disk in
the drive.
Power off your xbox and restart it (with disk in the
drive).
Evox should boot.
Now make sure that your network settings (in the evox.ini
file) are correct ... try to FTP to your xbox. (if it
doesn't work, correct evox.ini and reburn a new evox
Install HD disk)
If EvoX doesn't even boot , it means :
* you used media your xbox can't read.
* your evox dashboard isn't called default.xbe
* you made an error in the evox.ini
* you didn't make a "xiso" before burning.
* you didn't burn the "xiso" correctly
* your modchip doesn't have the HDD-swap feature
* the disk has no /backup directory with 5files
7. Format the drives
If everything above is OK , just select
"Install New drive" and then confirm ("Yes").
The software will now format the drives.
When finished , it will return the EvoX dashboard.
8. Transfer C & E
Now connect with FTP to your xbox. You
should see all drivenames.
Transfer the whole C & E backup u made on your PC
to the C & E on your new Xbox HD.
Remove the disk from your Xbox , and reboot.
The Xbox should now reboot from your new xbox HD.
If not , you probably did something wrong while restoring
the drives.
Just boot the Evox Install HD disk and you can FTP to
your xbox again and check what might have gone wrong.
If needed you can always reinstall your old xbox HD.
9. Change evox.ini on C
Under "[Misc]"
put "UseFDrive" to "Yes"
else you can't use the F drive correctly.
Your
new xbox HD is installed :-)
|
